Adjustment Method of Kawasaki Hydraulic Pump

Adjustment Method of Kawasaki Hydraulic Pump

Low pressure action is slow :

  1. Loosen the large lock nut ①
  2. Adjust nut ② inward, 1/4 turn each time, until the operation is normal
  3. Tighten the large lock nut ①

High pressure action is slow : 

  1. Loosen the small lock nut ③
  2. Adjust the square adjusting screw ④ inward, adjust 1/4 turn each time, until the operation is normal.
  3. Tighten the small lock nut ③

Hold the excavator at low pressure : 

  1. Loosen the large lock nut ①
  2. Adjust nut ② outwards, 1/4 turn each time, until the operation is normal
  3. Tighten the large lock nut ①

Hold the excavator under high pressure :

  1. Loosen the small lock nut ③
  2. Adjust the square adjusting screw ④ outward, adjust 1/4 turn each time, until the operation is normal.
  3. Tighten the small lock nut ③.

További Kawasaki Pumps check pictures 

Kapcsolatfelvétel 

WhatsApp, Wechat : 0086 15553722299 

 

 

 

Rate this post
Facebook
Twitter
LinkedIn
Pinterest

Kapcsolódó hozzászólások

hu_HUMagyar
Powered by TranslatePress